Coned Flanges Mild Steel 50 OD
- Tube or rod pushes through centre hole and is welded from underside.
- Ready for use once welded, no grinding required.
- Centre holes accurately machined, flange sits square on tube.
- No skinned knuckles when fixing flange to wall or floor because screw holes are angled away from tube.
- Screw holes pre-countersunk.
- Coned shape means the flange bears on its outer ring only, so will not rock on high-spots the way that flat-base flanges are inclined to do.
- 3.25mm thickness
| Outside diameter | Hole size in mm |
|---|
| 50mm | 12mm |
-250x250.jpg "End of Line Special")
