Mild Steel Coned Flanges
Coned Flanges Mild Steel 100 OD & 70 OD - for fixing tube to a floor or wall
- Tube or rod pushes through centre hole and is welded from underside.
- Ready for use once welded, no grinding required.
- Centre holes accurately machined, flange sits square on tube.
- No skinned knuckles when fixing flange to wall or floor because screw holes are angled away from tube.
- Coned shape means the flange bears on its outer ring only, so will not rock on high-spots the way that flat-base flanges are inclined to do.
- 3.25mm thickness
- Please note these do not have holes drilled for screw fixings - only a centre hole.
| Outside | Hole size in mm |
|---|---|
70mm 100mm | 12 32 38 50 |
From
